FX Wilcat MKII Tuning Regulator
This FX Wildcat MKII (MK2) tuning regulator made by Huma-Air is specially designed as a "one on one" replacement for the factory regulator. (standard or 2019 AMP model)
It can be placed into the pressure tube within a minute and replaces the original regulator
The Huma-Air FX Wildcat regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator.
Made of high grade aircraft aluminium in combination with bronze components
(For the real power lovers, the Huma-Air replacement AMP regulater is tested with .30 JSB 44.75 grain pellets at an average velocity of 942 ft/s, and JSB 50 grain pellets at an average velocity of 906 ft/s)
The benefits of the Huma-Air regulator for your FX Wildcat MKII:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Maximum use of the air volume due to our ultra compact build.
- It will give you a better shotcount and a full flat shotstring immediately.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
- Often the rifle will make less noise due to better balance in air usage
When you order your FX Wildcat MKII Tuning Regulator you will receive:
- Your regulator preset on to your own wishes.
- A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
- We will include a “Huma Regulated” breech sticker.
- Fitting instructions as pdf download.
Pressure settings of the FX Wildcat MKII Tuning Regulator
Your FX Wildcat regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.
Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.