Ataman ML15 series tuning regulator
For the Ataman ML15 we have a tuning regulator available what will improve airrifle's performance.
This regulator is vented to the atmosphere and is an one on one replacement for your factory regulator.
Due to our ultra compact build the regulator will give you more regulated volume available so you can get the same pellet velocity with less pressure.
The benefits of the Huma-Air regulator for your Ataman ML15:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Maximum use of the air volume due to our ultra compact build.
- It will give you a full flat shotstring immediately.
- Replacing the factory regulator for the Huma-Air Ataman M2R regulator will give you the most reliable performance
When you order your Ataman M2R Tuning Regulator you will receive:
- Your complete regulator preset on to your own wishes.
- A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
- We will include a “Huma-Air Regulated” breech sticker.
- Fitting instructions as pdf download.
Pressure settings of the Ataman ML15 series Regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma-Air regulator:
- Low pressure range: 60-110 bar for 16 Joule / 12 ft/lbs models.
- High pressure range: 100-170 bar for all FAC models
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.