Airgun Technology Vulcan tuning regulator
For the Airgun Technology Vulcan models we have a tuning pressure regulator available that replaces the original factory regulator
It is an one-on-one replacement, just remove the old regulator and plenum and replace it with the Huma-Air regulator and plenum.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
The benefits of the Vulcan tuning regulator
Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Due to our compact regulator build and different plenum size you will have more air available and you can use lower output pressure for the same power
When you order your Vulcan tuning regulator you will receive:
A constant pellet speed over the full working pressure range.
Due to our compact regulator build and different plenum size you will have more air available and you can use lower output pressure for the same power
When you order your Vulcan tuning regulator you will receive:
- Your regulator preset on to your own wishes;
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
- We will include a “Huma-Air regulated” breech sticker;
- Volume plenum matching the rifle model and caliber
Pressure settings of the Vulcan regulator
The Vulcan regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.