Air Arms S510 regulator.
Designed for placing inside the pressure tube. There are two o-rings on the regulator body who seals inside the tube wall. The regulator is vented to the atmosphere for excellent regulating behavior and no creeping up in power on the long term. The regulator has a seperate volume bus (plenum) matching the caliber and chosen pressure range.
The regbody is only 16 mm long with a very small neck. This ultra compact build makes sure there is almost no lose of air volume in the pressure tube.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.
The regbody is only 16 mm long with a very small neck. This ultra compact build makes sure there is almost no lose of air volume in the pressure tube.
A simple modification to your air rifle what will result in excellent shooting behavior and very consistent pelletspeed.
The benefits of the Huma-Air regulator for your Air Arms S510:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- It will give you a better shotcount and a full flat shotstring immediately.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
- Often the rifle will make less noise due to better balance in air usage
When you order your Air Arms Tuning Regulator you will receive:
- Your regulator preset on to your own wishes.
- A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
- We will include a “Huma-Air Regulated” breech sticker.
- Fitting instructions as pdf download.
Pressure settings of the Air Arms regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma regulator:
- Low pressure range: 60-110 bar for 16 Joule / 12 ft/lbs models.
- Medium pressure range: 70-150 bar for all FAC rifles from 1.77, .22 and .25.
- High pressure range: 100-170 bar for .25 extra heavy pellets >25 grain
After fitting the regulator the rifle's pressure gauge will indicate the regulated pressure. You can ad one of our Air Arms Quickfill units will pressure gauge and stainless steel quick connect fillprobe to see the reservoir fill pressure
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.