Huma-Air regulator for the Air Arms S200 airrifle.
The Huma-Air tuning regulator will regulate the airpressure in your S200 airgun. It reduces the primary high fill pressure in the cylinder into a lower pre-set working pressure. This will give you a constant pelletspeed and a higher accuracy. The design volume is based on the 16 Joule version but it can been set higher if preffered.
The installation of the regulator is very simple. The regulator is placed inside the pressure tube of the rifle and you are ready.
It is vented to the atmosphere, without the need of a breath hole in the cylinder, so no creeping up in power during time.
The installation of the regulator is very simple. The regulator is placed inside the pressure tube of the rifle and you are ready.
It is vented to the atmosphere, without the need of a breath hole in the cylinder, so no creeping up in power during time.
The benefits of the Huma-Air regulator for your Air Arms S200:
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- It will give you a better shotcount and a full flat shotstring immediately.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
- Often the rifle will make less noise due to better balance in air usage
When you order your Air Arms Tuning Regulator you will receive:
- Your regulator preset on to your own wishes;
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
- We will include a “Huma-Air regulated” breech sticker;
- Fitting instructions as pdf download
Pressure settings of the Air Arms S200 regulator
The S200 regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.