Artemis P10 tuning regulator
For the Spa / SMK / Artemis P10 we have a tuning pressure regulator available that replaces the original chinese regulator
It is an one-on-one replacement, just unscrew the old regulator and screw the tuning regulator and you are ready
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
It is an one-on-one replacement, just unscrew the old regulator and screw the tuning regulator and you are ready
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
The benefits of the Artemis P10 tuning regulator
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and high power FAC models.
When you order your Artemis P10 tuning regulator you will receive:
- Your regulator preset on to your own wishes;
- A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
- We will include a “Huma-Air regulated” breech sticker
- Fitting instructions as pdf download
Pressure settings of the regulator.
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.